This entry was posted on Thursday, November 15th, 2007 at 6:54 pm and is filed under Gabe, Sculpture, The Art of Life. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
I made a jig which was nothing more than a piece small piece of plywood with a board nailed to it that is set at an angle. Then another piece is pin nailed on top of that which holds the piece I want to cut in a pressure fit. I can post a picture if you want, it is simpler than it sounds.
Dave Says:
November 18th, 2007 at 7:11 pmVisit Dave
Those are really awesome, Gabe. I especially like the handled version with tapered pieces - how did you taper them?
This reminds me - I have another wedding present to complete!
Gabe Says:
December 3rd, 2007 at 5:18 pmVisit Gabe
I made a jig which was nothing more than a piece small piece of plywood with a board nailed to it that is set at an angle. Then another piece is pin nailed on top of that which holds the piece I want to cut in a pressure fit. I can post a picture if you want, it is simpler than it sounds.