Good friend Logan Porter is currently on a bike touring trip from Des Moines to Seattle. He is documenting the whole experience on his blog called Road Thrill. Definitely worth checking out and following along. (He also might head down to Portland after Seattle, so he might need a backyard to camp for a night.)
After thousands of years of erosion the petrified sand dunes in Arches NP have left some of the most amazing rock formations. So as in this digital world Descending Ashtray still stands. There is no wind and water in this world to erode the pictures or writing. Everything looks exactly as it did a year and half ago. Suspended in a vacuum of stored information. Where is it really? Somewhere among millions upon millions of Gigabytes of information. Suspended unchanging. There is only the delete and the update to affect its existence. With it we can delete and edit and reveal what ever we want to. Friendships, love affairs can be created and then erased at the push of a button. What can you trust? Things that are tangible, things that we can hold in our hand and touch. Or is it the information? Clogging, redirecting, shaping a new form of existence in the digital world.
Descending Ashtray last post 2/21/10
My little boy Eli has entered a “banging” phase in his toy usage, and my wife Sarah suggested I make him a hammer for Christmas. Here it is (he doesn’t read this blog, so no surprises will be spoiled). The head is a scrap bit of Oregon black walnut, and the handle is a turned and carved bit of basswood, so it has a nice balance and isn’t too heavy. I used some mineral oil for a finish in case he chews on it. Merry Christmas!
I am no stranger to “temporary” fixes. In fact, just yesterday I bungeed the battery into my 1970 F250′s rusted out battery holder, replacing the zip ties some other Jerry rigged. Once, in college, I delayed moving day so long that all the cardboard boxes in town had been snapped up by the well-prepared. Being resourceful, I packed up an apartment using nothing but plastic shopping bags. It’s about the right tool at the right time. ThereIFixedIt.com is a collection of some amazingly impromptu fixes.
Happy Fathers day, Dave!
It is good to be a Dad but it is also important to remember our Dad’s and Grandpa’s too. My Mom’s Dad just passed away recently and today we are going to have a memorial for him. I worked with my brother Eli and we made this urn to put his ashes in.
The whole thing is made from cedar (even the barn boards) except for the letters which are walnut. My Grandpa was a roofer and a rustic man, so we thought it was fitting to make him a house with wood shingles. The extension ladder moves up and down too.
It’s been awhile since I updated on the attic progress, and it’s certainly come a long way since the drywall and paint of a few months ago. I made a big push to get all the trim in place, as the electrician couldn’t get back in there without the baseboards in. We’d elected to have our wall outlets placed in the baseboard, you see. And I couldn’t hang baseboards until the floor was finished … so many dependencies in a project like this!
We’d intended to re-install the flooring we removed last summer. It was not the highest-quality Doug Fir, but it looked similar to all the “before” samples we saw in flooring showrooms sold as “reclaimed fir,” so we thought we’d save a few bucks and re-use the stuff we had. Turns out we didn’t have enough to use, and what we did have was covered in lead paint, so we had to come up with another option. Thankfully, our flooring guy was able to track down some gorgeous new CVG (clear vertical grain) fir locally, and we went ahead with that option. The material cost was higher (it wasn’t free), but the install cost dropped quite a bit since newly milled stuff is so consistent in width and machining, it requires less labor to install. And it looks amazing, as you can see from the photo below (the paintings are encaustic originals by Portland artist Amy Ruppel from her “state bird series.” The one on the left is Iowa’s Eastern Goldfinch; the one on the right is the Common Loon of Minnesota. I’m from Iowa, Sarah’s from Minnesota.)
From there, it was relatively quick work to get the baseboards in for the electrician, thanks to my Dewalt chop saw
One thing I will say – I’ve used pre-primed MDF trim (both standard and ultralight versions) throughout the project, and would highly recommend it, both from a cost savings standpoint (less than a third the cost of poplar), and also ease of installation. I mean, it’s pre-primed. What’s not to love about that?
Once the baseboards were in, I dallied a bit on finishing some of the other trim to move forward with a built-in Sarah had requested early in the project, a bench over in the corner she’ll use as a reading nook. I found a nice plan on finehomebuilding.com (a great resource for remodeling that’s answered many of my questions, and worth the subscription fee) that I used as the basis for my own version. It’s basically some 3/4″ poplar plywood, a piano hinge and some trim scraps. The whole thing went together in two hours, I’ll bet, and it was built in situ, so it fits the space perfectly (or it looks like it does with some caulk!).
Probably my favorite feature of the project so far, though, is the door that separates the bedroom from the bathroom (still very much a work in progress). We bought a door from the Rebuilding Center, a local materials recycling center for just $20, and it even had the original wavy glass when we brought it home. But, the low cost carried a hidden price: the door was covered in at least four coats of lead paint that had to be removed.
Fortunately, demand for green products is now common enough that there’s a non-toxic version of almost every chemical, paint stripper included. I put on a thick coat of something called Ready Strip
Once the years of lead paint were gone, I had a few other issues to contend with. In my attempts to get the glass out in one piece, I broke it, as well as the wood molding holding it in place. There were also quite a few holes left by the door lock hardware that had to be filled, as I had another mounting idea in mind. I did this with a few carefully placed dutchmen (re-using some of the old flooring) installed with the help of my mini router and a sharp chisel.
After a few coats of clear Seal-A-Cell, I moved on to hardware, which was surprisingly difficult to find. I’m not sure where I first saw barn door hardware used, but I thought its rustic look would go really well with the rustic door. I ended up locating it at a farm store nearby called Wilco, and it was among the cheapest hardware I’ve bought for the project (total of about $50). I am so pleased with the results.
Every cake needs icing, and every door needs its glass. Since I’d broken the original, I went out on a limb and tracked down some security glass, aka wire glass from Culver Glass, a local specialty supplier. But that wasn’t enough. My door needed a little more, supplied by an amazing Portland craftsman named Lee Littlewood, proprietor of Lee’s Better Letters.
Lee hand-painted the front of the glass to my specifications, using as inspiration my direction that “the type style should look like it came from a factory door, circa 1930 or so.” He did a few sketches on paper, then painted the type directly on the glass in black enamel. Once that had dried hard for a few days, he added silver-colored gold leaf to the interior of the letters, burnished on in a light circular pattern. No computers were used, except in the exchange of paper sketches. I could not be happier.
Well, maybe if the tile fairy finished the bathroom for me.